Reduce cabling, installation time and costs with the Haydon HAY-POE-MULTI, designed to connect two IP/PoE devices using a single Cat5 or Cat6 network cable.
Ideal for CCTV installations where running an additional Ethernet cable would be difficult or expensive, the HAY-POE-MULTI allows two compatible IP cameras or network devices to share a single cable run back to a PoE switch or NVR.
Supporting both IEEE 802.3af PoE and IEEE 802.3at PoE+, it can provide up to 15.4W per device with Type 1 PoE or up to 25.5W per device with Type 2 PoE+.
Key Features:
-
Connect 2 IP/PoE devices using a single Cat5/6 cable
- Ideal for IP CCTV camera installations
-
Supports IEEE 802.3af PoE
-
Supports IEEE 802.3at PoE+
-
Up to 15.4W per device with Type 1 PoE
-
Up to 25.5W per device with Type 2 PoE+
-
Switchable between Mode A and Mode B
- Compatible with PoE switches and PoE NVRs
- Can also be used with non-PoE switches/NVRs when devices are powered separately
- No separate PoE injector or PSU required when used with compatible PoE equipment
- Helps reduce additional cable runs
-
Simple plug-and-play installation
Specifications:
-
Model: HAY-POE-MULTI
-
Devices Supported: 2
-
Cable Compatibility: Cat5 / Cat5e / Cat6
-
PoE Standard: IEEE 802.3af / IEEE 802.3at
-
Type 1 PoE Output: Up to 15.4W per device
-
Type 2 PoE+ Output: Up to 25.5W per device
-
Modes: Type A / Type B
-
Application: IP CCTV / Networking